otae.com

What are the steps to properly refinish a wooden table

Sure! Here are six different ways you could answer that question:

**Basic Steps**: First, you’ll want to clean the table thoroughly. Then, sand it down to remove the old finish. After that, wipe off the dust, apply a wood stain if you want color, and finally, seal it with a clear finish like polyurethane.

**Detailed Process**: Start by removing any items from the table and cleaning it. Use a sander or sandpaper to get rid of the old finish. Once it’s smooth, apply a wood conditioner if you’re staining. Then, stain it to your desired shade and finish with a couple of coats of polyurethane for protection.

**Quick Guide**: Clean it, sand it, stain it if you want, and finish with a protective coat. Easy peasy!

**Step-by-Step**: First, take everything off the table and clean it well. Next, sand it down to get rid of the old finish. After that, you can apply some stain for color, and finish it off with a protective topcoat.

**In a Nutshell**: Just clean, sand, stain (if you like), and seal it. Make sure to let each layer dry properly!