otae.com

How can I create a DIY picnic table

Sure! Here are three different ways you could go about creating a DIY picnic table:

**Simple Wooden Picnic Table**: Start by gathering some pressure-treated wood, like 2x4s for the tabletop and benches. Cut the wood to your desired lengths. You’ll need four legs (2x4s cut to about 30 inches), two long pieces for the table’s length (around 6 feet), and a few shorter pieces for the width. Assemble the tabletop by attaching the lengths with screws, then attach the legs at each corner. Finally, add the benches on either side, and you’re good to go! Don’t forget to sand it down and maybe add some outdoor sealant.

**Pallet Picnic Table**: If you want to save some cash, look for old pallets. You can often find them for free! Take apart a couple of pallets and use the slats to create your tabletop and benches. You’ll need to reinforce the structure with some extra wood for stability. Just make sure to sand everything down to avoid splinters. You can also paint or stain it for a nice finish!