otae.com

How do I properly caulk a bathtub or sink

Sure thing! Here are three different ways to tackle that question:

**Basic Steps**: First, make sure the area is clean and dry. Remove any old caulk with a scraper or utility knife. Then, cut the tip of the caulk tube at a 45-degree angle and load it into a caulking gun. Apply a steady bead along the seam where the tub or sink meets the wall. Smooth it out with your finger or a caulk smoothing tool, and let it cure according to the instructions on the caulk tube.

**Pro Tips**: Before you start, use painter's tape to mask off the edges for a clean line – it makes a big difference! When you apply the caulk, try to do it in one continuous motion to avoid gaps. After smoothing it out, remove the tape while the caulk is still wet for the best finish. And don’t forget to let it dry completely before using the tub or sink!