otae.com

How do you troubleshoot common motorcycle electrical issues

Sure! Here are three different ways to tackle that question:

**Basic Checks First**: Start with the basics! Check the battery connections to make sure they’re tight and free of corrosion. Then, look at the fuses; a blown fuse can cause all sorts of problems. If everything looks good there, grab a multimeter and check the voltage at the battery while the bike is running. If it’s below 13.5 volts, you might have a charging issue.

**Wiring Inspection**: Sometimes, it’s all about the wiring. Give the wiring harness a good once-over for any frayed or damaged wires. Pay special attention to areas where the wires might rub against metal parts. If you find any issues, you can either repair them with electrical tape or replace the damaged sections altogether.