How do I perform a pre-ride safety check on my motorcycle

[RemyMcFarland]

How do I perform a pre-ride safety check on my motorcycle

[DangeloHuerta]

Sure thing! Here are three different ways to do a pre-ride safety check on your motorcycle:

[LexiFox]

**Quick and Simple Check**: Alright, before you hit the road, just do a quick walk-around. Check the tires for any obvious damage or low pressure, make sure your lights are working, and give the brakes a squeeze. Don’t forget to check the oil level too. If everything looks good, you’re ready to roll!

[RyannHansen]

**Detailed Inspection**: So, before you take off, take a few minutes to really inspect your bike. Start with the tires—look for cracks and check the pressure. Then, check your brakes, clutch, and throttle for smooth operation. Make sure all your lights and signals are functioning, and give the chain a quick look to see if it’s lubed up. Finally, check the fuel level and make sure you’ve got your gear ready. Safety first!